UPS & Backup Power Battery Monitoring System Daily power glitches and outright power failures are a fact of life and the key consideration that drives your investment in mission critical UPS power conditioning & backup systems. Now you can be sure your UPS power batteries will work to support vital applications, systems and networks during the many everyday power disturbances and outright power failures that each business is almost certain to experience.

BTECH’s S5 Series Battery Monitoring and Validation System has been designed specifically for your UPS battery cabinet.

Our patented and proven impedance measurement technology finds bad batteries well before they pose a risk to your critical systems.

Plus, with battery sensing harnesses pre-designed and tested for your battery system, installation time is cut in half while increasing system reliability.

Why BTECH Is The World Leader In Battery Monitoring

We’re Proven: Over 4000 Systems Installed Worldwide.

We’re Superior: BTECH’s patented impedance method provides rock solid data accuracy and stability, allowing more time to respond no other system comes close.

We’re Non-Destructive: With a load signal optimized to the battery type, our system never subjects your batteries to a stressful load test. Additionally, our system is not powered by your batteries.

We Know Your Batteries: With more experience than anyone in the business, our sales and service staff is there for you when you have questions.

Key System Features:

• BTECH Monitors Key Battery Parameters in Real Time: System Voltage, Float, Charge and Discharge Current, plus ambient and pilot cell temperature.
• Programmed Cell Impedance Measurement: Up to 24x / Day
• Programmable Test & Out-of-Limits Alarms
• Battery Discharge Data Logging
• Up to 480 Individual Cells and 4 Strings per system
• Individual String Current Monitoring for multi-string systems
• Complete Isolation from the Battery String
• No PC Required

Facility Management System Integration:

• MODBUS over TCP/IP for simple third-party software integration
• (6) User-configurable Dry Contact Alarms

Alarm and Data Acquisition Options:

• Local: RS-232 and USB
• Remote: 56k Modem and Integral Ethernet
• Alarms: Text Message to multiple cell phones, pagers or e-mail addresses, through BVM Software or FMS integration

Safety:

• BTECH Quick-Disconnect Safety Fuses simplify battery replacements while protecting personnel during installation and maintenance

Measurement Capability: Total Voltage: 0-600V Total Number Strings: 4 Unit Voltage: 1-16 VDC Unit Impedance 100µW to 20mW Temperature Unit and Ambient: -32°F to 160°F Discharge Events: Date & Time System Voltage Load Current Power Removed Discharge Logging: Programmable Connection Capacity: Total Connection Points: 480 Total Number of Parallel Strings: 4 Measurement Accuracy & Repeatability: System Voltage: +/ -0.1% Full Scale Unit Voltage: +/ -0.1% of Reading Unit Impedance: +/ -0.01 mW Temperature: +/ -1.0°F

Power Requirements: 110-250 VAC (UPS Protected Power) Enclosure: Controller: Metal, Rack or Wall Mount 24 Unit DCM: Flame Retardant Poly LED Indicators - VM24 DCM: Green = Power On LED Indicators - SCM600 Controller: Green = Summary No Alarms Yellow = Summary Maintenance Alarms Red = Summary Critical Alarms Red Equipment = Module not Communicating Alternating Green = Performing Measurement Software: BVM 4.1 Windows® based software package designed for Windows® 2000 and higher CE Mark